Introduction
|
|
|
|
|
|
The all new SBL2 range of solar powered LED pole top bollard light is ideal for lighting locations where hurricanes, tsunamis, tidal surges and generalized flooding is prominent.
The sealed self-contained design combined with high quality impact resistant construction with proven market performance makes the SBL2 range of bollards (12" to 40"), poles (inground or surface), wall or pontoon mounting, the leader in solar lighting. Available in 1, 2 or 4 head versions, depending on the mounting with optional stainless steel reflectors.
Built to withstand the elements, both natural and human, the IP68/IK10 solar pathway lights are the perfect asset in high risk areas.
|
|
KEY FEATURES OF THE SBL2 OVER COMPETITORS & ON-GRID PRODUCTS
■ Low cost and quick installation, no trenching, cabling or wiring required
■ IP68 Certified (AS/NZS 60529:2004 IPx8, IP4x, IP6x) submersible to 3m depth
■ IK10 Certified (IEC 62262:2002) can withstand impact from debris and vandalism
■ Isolated from power outages for continuous illumination
■ Up to 70% more autonomy than competitors at full power output dusk until dawn
|
|
From vandal attack, severe high wind events, flood disasters, monsoonal rain, crashing waves, golf ball size hail or just daily snow coverage, no similar product will out perform our SBL2 Series SR4OH Model Solar LED Bollard pole top light design for durability and continuous performance. Electronic circuit design fully operationally tested in the field from Saudi Arabia to the sub zero snow regions of Canada.
|
Key Benefits
Key Benefits
|
- Superior vandal resistance - proven history
- No power bills - off grid so no power outages ever
- SAFE - Extra Low Voltage anyone can install
- Low installed cost and minimal site impact
- No trenching, cabling or wiring
|
|
- 8 Years of product design expertise and market history
- Virtually maintenance free with no on-going costs
- Deployment anywhere there is some direct sunshine
- Removable, relocatable and can be temporary
- Provide a green statement reducing carbon emissions
|
Applications
Applications
|
Pathways |
|
Pontoons & Jetties |
|
Construction Sites |
Bike Ways |
|
Marina Walkways |
|
Housing Estates |
Driveway |
|
Landscaping |
|
Local Government |
Gantry Lighting |
|
Playground Lighting |
|
D.O.D. Bases |
Perimeter Security Lighting |
|
Sign Lighting |
|
Hotels and Resort |
SBL2 Standard Light Head
Suggested maximum runtime based on appropriate install location with no dimming |
Ordering Model Number |
Model Lumens |
Power Draw (mA) |
Location |
Night Time Run Hours |
Total Amps Used |
Daily Depth of Discharge |
Battery Autonomy Days |
Battery Autonomy Hours |
SBL2-040ANW |
16 |
40 |
Anchorage, AK |
18.73 |
0.75 |
5% |
20.4 |
382.5 |
SBL2-080ANW |
32 |
80 |
Edmonton, AB |
16.73 |
1.34 |
9% |
11.4 |
191.3 |
SBL2-120ANW |
48 |
120 |
Billings, MT |
15.56 |
1.87 |
12% |
8.2 |
127.5 |
SBL2-160ANW |
64 |
160 |
Denver, CO |
14.79 |
2.37 |
15% |
6.5 |
95.6 |
SBL2-200ANW |
80 |
200 |
Houston, TX |
13.86 |
2.77 |
18% |
5.5 |
76.5 |
*D.D.D = Daily Depth of Discharge of battery / Calculations allow for no daily solar input
Shaded location requirements based upon mid winter conditions |
|
SBL2-200NSW: |
|
SBL2-160NW: |
To be used in direct sunlight with no shading
- 120mA to be used where up to 30% of the day be it the morning or late afternoon is in shade in place of 200mA
- 080mA where there is part shading throughout the day and mainly between 10am and 2pm in place of 200mA
- 40mA where there is shading throughout the whole day consistently in place of 200mA
|
|
To be used in direct sunlight with no shading
- 120mA to be used where up to 30% of the day be it the morning or late afternoon is in shade in place of 160mA
- 80mA where there is shading throughout the day and mainly between 10am and 2pm in place of 160mA
- 40mA where there is shading throughout the whole day consistently in place of 200mA
|
|
|
|
SBL2-120NW: |
|
SBL2-080NW: |
To be used in direct sunlight with no shading:
- 80mA to be used where up to 30% of the day be it the morning or late afternoon is in shade in place of 120mA
- 40mA where there is shading throughout the day and mainly between 10am and 2pm in place of 120mA
|
|
To be used in direct sunlight with no shading:
- 40mA to be used where up to 30% of the day be it the morning or late afternoon is in shade in place of 80mA
|
Gallery
City of Duluth Lake Superior 1
City of Duluth Lake Superior 2
City of Duluth Lake Superior 3
DarwinFloatingWalkwayNight
Solar-Bollard-Armadale-Hospital
Solar-Bollard-Front-Pagen1
Solar-Bollard-Heritage-StreetFP
Solar-Bollard-Rochdale-Estates
Solar-Bollard-pole reflector
Solar-Bollards-SR-Bollard-ModelFP
Solar-LED-Bollard-Bathers-Beach
Solar-LED-Bollard-Court-Yard-Lighting
Solar-LED-Bollard-Gate-Entry
Solar-LED-Bollard-in-Snow
Solar-Pathway-Light-Snow1
Solar-Pathway-Lights-Jacobs-Well