Linda Transparent LED

The luminaries, for LED, supply symmetric diffused direct-indirect distribution. Optional wide and asymmetric reflector available.

Luminaire efficiency 123 lm/W.

LED lifetime (L90/B10): 30000 h. (Tj 60°C) 

Lifetime (L85/B10): 50000 h. (Tj 60°C) 

Photobiological safety RG0, risk absent, in compliance with IEC 62471

Linear LED module 24W/840, colour temperature 4000 K.

Colour rendering Ra >80. 

Chromaticity tolerance (MacAdam): 3. 

Housing in a Transparent self-extinguishing polycarbonate, UV stabilized, injection molded.
Ecologic anti-aging injected sealing gasket.
Diffuser in transparent photo-embossed self-extinguishing polycarbonate, UV stabilized, injection molded with smooth outer surface and differentiated prismatic inner surface.
Gear-tray reflector unit with reduced width to increase the indirect light, in hot-galvanized steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening.

Mechanical strength IK10 (20 joule)

Snug fit snap-lock clips for diffuser mounting, in gray polycarbonate, tamper-proof opening supplied as standard.

Stainless steel fixing brackets, Ceiling clamps

Ceiling clamps and chain hook-chain hook,  compact versions excluded.

Electronic ballast wiring, 110/277V-60Hz.

LED Drivers installed - Philips Xitanium or Thomas Research 

LED lifetime (L90/B10): 30000 h. (Tj 60°C) 

Lifetime (L85/B10): 50000 h. (Tj 60°C) 

Intertek ETL Approved to standards:
UL Standard for Safety for Luminaires-(UL 1598, UL8750)
CSA Standard for Safety for Luminaires- (CSA C22.2 No.250.0, CSA C22.2 No.250.13). 

Parking areas or environment with low ceiling, where ceiling indirect lighting and direct lighting supply a visual comfort, even from personal security viewpoint.

Virtually in all environments compatibly with the aggressive agents which compromise the use of plastic materials (ask for polycarbonate compatibility sheet); for instance not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixture, fading mineral oil vapors or fumes of lubricating emulsions to cool down machine tools are present.

Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.