DCDALMS360
Introduction
The Digital Motion Detector combines light level sensing and PIR detection in a single unit for the lighting control system. The digital detector is a key element for occupancy control and daylight harvesting.
The digital detector uses a direct 2-wire connection to the DALI bus and draws power from the DALI bus (8mA at 50% duty cycle).
• Adjustable 360° PIR detector and light level (Lux) sensitivity • Multi master operation and control over the DALI bus • Light level tracking has high IR and UV rejection • Supports linked control of PIR or Lux sensing for the same targets or different targets (e.g. Whole room (PIR) and window luminaires (Lux) control • Full collision detection and restart ensures that commands are sent • Configurable on- and off actions |
• Up to 4 switchable poles, for example: normal hours, after hours, generator and security • Supports user-created custom sequences • Fully compatible with switch and control system overrides • Allows easy addressing with torch selection • Protected against accidental mains connection • Supports power failure and restart • Use SPST momentary contact switch for override with MAX/OFF/DIM UP/DIM DOWN command • Remote Lux level read and set-point from networked computer (see right) |
Part Number | Description |
DCDALMS360 | Digital Motion Detector, 360° PIR and Photocell |